Skip to content
All Dry Services of the Bluegrass logoAll Dry Services of the Bluegrass
Technician holding a moisture meter against a water-stained ceiling during an inspection

Free mold inspections*

Mold Inspections

If you can see mold, or you have had water damage that was never properly mitigated, a remediation specialist inspects the area of concern with moisture meters and thermal imaging. Where neither is present, a testing or environmental company is the better first call, and we will say so. Then we sit down and tell you what we found.

Call the line for your area

Request a free inspection*

What the inspection covers

An inspection looks for moisture as well as mold

Mold growth and the moisture behind it. Growth that is removed without finding the water that fed it will be back, in the same place, usually within a season. So the inspection spends more time with a meter than with a flashlight.

Our technicians assess visible signs of mold and water damage, and use moisture meters and thermal imaging to detect hidden moisture behind walls and under floors. We will need access to adjacent rooms and to the spaces above and below the suspected area, because that is usually where the water came from rather than where it showed up.

How it runs

What happens on the day

01

Inspect the area of concern

Visible growth, staining, and the pattern of where it is and is not. We inspect the area of concern rather than surveying a whole property.

02

Read the moisture

Meters and thermal imaging, including behind walls and under flooring.

03

Follow it back to a source

Adjacent rooms, above and below, plus HVAC condensation, which is a common source. We identify the moisture problem; correcting it is another trade's work.

04

Sit down with you

What we found, what we would propose, and why. Your questions answered before anything is quoted.

05

Set a date for the estimate

You get honest findings, a clear plan and an estimate for remediation if needed.

Our position

Inspection first, testing when it is warranted

We do not collect air or surface samples for lab analysis. Mold testing is a legitimate service and it is one we refer out rather than sell. Where testing is warranted we will point you at third parties unaffiliated with us.

If you want lab testing, we will recommend third parties who have no relationship with us, and we frequently do remediation after somebody else's assessment has confirmed there is a problem. That is the sequence we think is right, and it is the one our own FAQ has said for years.

Heavy dark mold growth across floor framing in a crawlspace, the kind of thing a visual inspection is looking for

Where the moisture comes from

Extreme swings in weather

This climate does much of the work for mold on its own, and most of what we find traces back to one of four things.

Humid summers

Weeks of high outdoor humidity keep indoor air above the level growth needs, with no leak involved at all.

Deep freezes

A hard freeze splits a supply line, and the water runs behind a wall or under a floor until somebody notices.

Condensation

Warm damp air meeting a cold surface: masonry below grade, uninsulated ductwork, a window reveal. It wets the same spot repeatedly.

Undetected leaks

A slow supply or waste leak inside a cavity, which is the one that has usually been running longest by the time we see it.

We had a mold problem. After figuring out how to keep water out of our basement, we called All Dry to give us a quote for removing dry wall and carpet. The damaged areas have been removed very neatly. The areas all have straight lines which we believe will be easier to replace. Everything smells fresh and clean.

Virgil Covington

5 on Google, across 35 reviews of this listing

When testing is worth paying for

Three cases where testing is worth paying for

A dispute

Landlord and tenant, a sale, an insurance disagreement. An independent report carries weight a contractor's opinion does not.

A medical question

If a doctor is asking what someone is being exposed to, that is a question for a lab.

Verification after work

Confirming a completed remediation is clear, ideally by someone other than the firm that did it.

FAQ

Questions Central Kentucky property owners ask us

What takes place during a mold inspection?

Our inspections are done by a mold remediation specialist and are strictly visual. We assess visual signs of mold and water damage and use moisture meters and thermal imaging to detect hidden moisture behind walls and under floors. We may need to access adjacent rooms or the spaces above and below the affected area. Afterwards we meet with you to discuss our findings and suggested remediation plans, answer your questions, and set a date for the estimate.

What is the difference between mold testing and mold remediation?

Mold testing involves collecting air and surface samples which are sent to a lab to determine spore counts and identify specific types of fungi. We do not provide mold testing. Where testing is warranted we refer you to an unaffiliated testing or environmental company. We provide visual inspections of the area of concern and remediation work, and we can recommend third parties unaffiliated with us if you decide to proceed with lab testing.

Is the inspection free?

Yes, during business hours*, including in the case where we look and tell you that you do not have a problem that needs us. Inspections and estimates must be authorised by the property owner or the management company.

Do I need a test before remediation?

Usually not. The EPA's own position is that sampling is generally unnecessary when mold is visible, because the result does not change what has to happen: remove the growth and correct the moisture. Testing is most useful where somebody has to be convinced, such as a dispute or a sale.

Emergency response, 24 hours a day

Emergency restoration response, 24 hours a day

One call gets our technicians heading your way, a free inspection, and your insurance billed directly. Day or night.

Answering now

Answered by local staff, not AI or an answering service.

  • We aim to be there within the hour
  • Free inspections and estimates*
  • Billed direct to your insurer

*Free inspections and estimates are offered during business hours. Some conditions apply; call for further information. Inspections and estimates must be authorized by the property owner or management company.

  • We aim to be there within the hour
  • IICRC certified firm
  • EPA Lead-Safe certified firm
  • BBB A+ rated, accredited since 2023
  • Locally owned and operated
  • 24/7 live calls
  • Free inspections
  • We bill your insurance directly
  • Veteran discounts
  • We never use subcontractors
  • IICRC Certified Firm
  • EPA Lead-Safe Certified FirmNAT-F274909-1
  • BBB Accredited BusinessA+ rated